Chip Inductors

- Readily solderable
- Available in standard & non-standard inductance/tolerance values
- Available in application-specific designs
- Expertise derived from Gowanda’s legacy in Space/Aero programs
- Low to high volumes
- Military QPL-approved series; built & tested to meet M83446
- In-house environmental lab support
- Epoxy coated series
- Meets 1% TML outgassing per ASTM E595
Unlike other chip manufacturers, Gowanda’s chip inductors utilize co-fired terminations and fully encapsulated designs to address the market need for:
- Chemical Resistance
- Vibration/shear resistance
- Electrical and mechanical integrity
- Durability during handling/processing
- Implantable device components (human body)
New Design vs. Existing Design
The company’s H-Core series of chip inductors are designed to offer a solution to those facing challenges with their traditional molded inductors:

MOLDED INDUCTOR CHALLENGES
- Internal solder connections
- Asian coil form obsolescence
- Mold compound supply/demand issues
- Lack of N. American raw material suppliers
- Labor intensive processes
- Long lead times

GOWANDA’S H-CORE SOLUTION
- No internal solder connections, increases reliability
- Coil forms readily available
- Windings are fully protected by UV
- Made in USA with fully automated assembly
- Higher Q; SRF performance is 2-3X better
- Higher current ratings (lower power consumption)
Learn more about Gowanda’s chip inductors by clicking on the individual series below:
RF Surface Mount
Series | Inductance µH |
DCR Ohms |
Current Rating mA DC |
||
---|---|---|---|---|---|
Ceramic Wirewound Chip Inductor | |||||
![]() |
CC0402 | 0.0009 – 0.220 | 0.040 – 2.0 | 37.5 – 1020 | |
![]() |
CC0603 | 0.0018 – 0.330 | 0.070 – 2.2 | 179 – 1000 | |
![]() |
CC0805 | 0.0022 – 2.2 | 0.080 – 5.0 | 140 – 1000 | |
![]() |
CC1008 | 0.010 – 4.7 | 0.080 – 4.9 | 220 – 1000 | |
Ferrite Wirewound Chip Inductor | |||||
![]() |
CF1008 | 0.082 – 100 | 0.150 – 28 | 79 – 1086 | |
Ceramic Wirewound High Performance Chip Inductor | |||||
![]() |
CC4H1008 | 0.0082 – 0.100 | 0.090 – 0.210 | 1100 – 1840 | |
![]() |
CC4H1210 | 0.010 – 0.0082 | 0.080 – 0.150 | 1300 – 2000 | |
![]() |
CC4H1812 | 0.010 – 0.100 | 0.060 -0.135 | 1560 – 2430 | |
Ferrite Wirewound High Performance Chip Inductor | |||||
![]() |
CF4H1008 | 0.12 – 100 | 0.15 – 16 | 125 – 1420 | |
![]() |
CF4H1210 | 0.10 – 100 | 0.070 – 9.5 | 160 – 2170 | |
![]() |
CF4H1812 | 0.12 – 1000 | 0.060 – 30 | 96 – 2430 | |
Wirewound Unshielded Epoxy Coated Chip Inductor | |||||
![]() |
SMRF1010 | 0.010 – 27 | 0.060 – 6.9 | 120 – 1270 | |
![]() |
SMRF1512 | 0.010 – 1000 | 0.040 – 80 | 25 – 1000 | |
Wirewound Shielded Epoxy Coated Chip Inductor | |||||
![]() |
SMRF1512S | 0.010 – 10000 | 0.030 – 110 | 21 – 1000 |
Military RF Surface Mount
Custom Products
Gowanda welcomes the opportunity to assist its customers with application-specific designs for a particular application where the requirements can not be met by off-the-shelf components.
Our capabilities in design, development, production and testing are extensive. If you are interested in custom products please contact us for assistance.