First in Industry – RF Surface Mount Inductors with Established Reliability
Gowanda’s ER3013 Series breaks new ground by providing SMT option to traditional thru-hole designs, for military and other high-reliability RF applications.
Gowanda, NY (USA) – Gowanda Electronics, a designer and manufacturer of precision electronic components for radio frequency and power applications, announces the introduction of the industry’s first off-the-shelf RF Surface Mount (SMT) Inductors with Established Reliability (ER) rating. The first-ever ER SMT series – Gowanda ER3013 – was developed by Gowanda in response to a market need for surface mount options to the traditional leaded (thru-hole) designs.
Surface mount configurations lend themselves to higher-efficiency “pick and place” circuit board assembly processes versus the more laborious, multi-step thru-hole assembly methods. The introduction of Gowanda’s ER SMT series will enable faster assembly processing, thereby helping to reduce the cost of high-reliability electronic systems where ER components are utilized. The introduction of this new series also sends a message to the design community – that SMT designs are attainable even for some of the most challenging high-reliability components.
“This development from Gowanda not only breaks new ground but also helps to assure design engineers that their next generation designs will have access to the necessary components – especially since Gowanda plans to introduce more ER SMT designs in the future,” said Don McElheny, CEO of Gowanda Components Group.
The ER3013 series meets the military’s Qualified Products List (QPL) requirements for Established Reliability to failure rate level M and addresses MIL-PRF-39010 slash numbers /19, /20 and /21. This qualification required extensive testing for electrical, environmental, mechanical and thermal performance. Level M represents the first level of failure rating for off-the-shelf inductors for high-reliability applications. In its ongoing commitment to the military market, Gowanda intends to achieve higher level failure ratings (Level P, then Level R) as ongoing testing continues to accumulate the hours necessary to attain those ratings on this ER SMT series.
Gowanda’s wirewound, molded ER3013 series is designed for RF applications in military, aerospace and space – including defense and NASA communities – for use in communication, guidance, security, radar, test & evaluation and special mission applications.
The performance range provided by the ER3013 series includes inductance from 0.10 to 1000 µH, Q min from 25 to 55, SRF MHz min from 3.4 to 680, DCR Ohms max from 0.08 to 72, and current rating mA DC from 28 to 1380. The specific MIL-PRF-39010 slash number determines the core type (phenolic, powdered iron or ferrite) and operating temperature range (-55°C to +105°C or -55°C to +125°C). See table. Links to series information, series datasheet and other helpful information are provided below.
Performance Ranges for Gowanda's MIL-PRF-39010 Level M Established Reliability Surface Mount Series
|Gowanda Series||Military Numbers||L
|0.10 – 1.0
1.1 – 27
30 – 1000
|25 – 40
25 – 50
30 – 45
|230 – 680
20 – 150
3.4 – 24
|0.080 – 1.0
0.180 – 3.5
3.4 – 72
|390 – 1380
140 – 620
28 – 130
For more information regarding pricing, delivery, higher reliability or upscreening requirements please contact Gowanda Electronics at USA +1-716-532-2234 or email@example.com.
For more information about QPL go to the website for Defense Logistics Agency DLA Land and Maritime (previously referred to as DSCC) at http://www.dla.mil/LandandMaritime.aspx. For details on MIL-PRF-39010 and its slash numbers go directly to: https://landandmaritimeapps.dla.mil/programs/milspec/ListDocs.aspx?BasicDoc=MIL-PRF-39010.