C182SM SERIES

Broadband Conical Surface Mount Inductor
Datasheet
RoHS Compliant

The C182SM series from Gowanda Electronics consists of surface-mount conical inductors optimized for broadband applications, featuring high Q factors, low profile designs, and stable inductance across a wide frequency range. These inductors are designed for use in high-frequency circuits, including RF test and measurement, transmission amplifiers, and critical aerospace and defense systems, ensuring reliable and consistent performance.

  • Surface-Mount Configuration: Designed for high-frequency SMT applications.
  • High Performance: Designed for RF applications with low insertion loss and high Q factors
  • Applications: RF test, transmission amplifiers, aerospace, and defense.
Request Sample
Request Quote

PARAMETRIC SEARCH

ImageNameMountingInductance (µH)DCR (Ω)Current Rating (A DC)TurnsWire Size (AWG)Wire Typehf:tax:pa_mounting-typehf:tax:pa_inductance-µhhf:tax:pa_dcr-ωhf:tax:pa_current-rating-a-dchf:tax:pa_turnshf:tax:pa_wire-size-awghf:tax:pa_wire-typehf:tax:pa_series
Broadband Conical Surface Mount Inductor
C182SM11047G6SMT10.77.10.1511047Gold Plated Coppersmt10-77-10-1511047gold-plated-copperc182sm
Broadband Conical Surface Mount Inductor
C182SM7844G6SMT62.850.2367844Gold Plated Coppersmt62-850-2367844gold-plated-copperc182sm
Broadband Conical Surface Mount Inductor
C182SM6042G6SMT31.290.356042Gold Plated Coppersmt31-290-356042gold-plated-copperc182sm
Broadband Conical Surface Mount Inductor
C182SM4840G6SMT20.650.4944840Gold Plated Coppersmt20-650-4944840gold-plated-copperc182sm
Broadband Conical Surface Mount Inductor
C182SM3638G6SMT1.470.330.6943638Gold Plated Coppersmt1-470-330-6943638gold-plated-copperc182sm

Notes

  1. Current Rating is based on a 100°C temperature rise at an ambient
    temperature of 25°C
  2. All non-tolerance and electrical data are reference only and based
    on nominal data
  3. MSL Rating: 1
  4. Terminal is elongated to allow for soldering close to the tip of the coil
  5. Recommended that component is epoxied to substrate before
    reflow soldering
  6. Materials are fungus-inert to meet method 508 of MIL-STD-810H
  7. Meets a TML (Total Mass Loss) requirement of 1.0% maximum
    when tested in accordance with ASTM E595; this calculation does
    not include WVR (Water Vapor Recovered)

Termination:

Gold (Au) over Copper

Environmental

Environmental:

RoHS Compliant

Operating Temperature Range:

-55°C to +125°C

Storage Temperature:

-55°C to +125°C

Download
Conical Brochure